Avaya 1120E User Manual page 20

Introduction to the Avaya 1120E IP Deskphone
20 Avaya 1120E IP Deskphone with SIP Software User Guide
Key
Comments? infodev@avaya.com
Function
Context-sensitive soft keys are located
below the display area. The LCD label above
each key changes based on the active
feature.
Use the Volume control buttons to adjust
the volume of the ringer, handset, headset,
speaker, and the Handsfree feature. Press
the top button to increase the volume, and
press the bottom button to decrease the
volume.
Press the Mute key to listen to the call
without transmitting. Press the Mute key
again to return to two-way conversation. The
Mute key applies to handsfree, handset, and
headset microphones.
Note: When you enable mute, a red LED on
the Mute key remains lit.
Press the Handsfree key to activate the
built-in speaker and microphone of the IP
Deskphone.
Note: The Handsfree LED indicator on the
Handsfree key lights to indicate when
handsfree is active.
Use the Navigation Key Cluster to scroll
through menus and lists that appear on the
LCD display screen or for text entry. The
outer part of this key cluster rocks for up,
down, left, and right movements.
Use the Enter key, at the center of the
Navigation Key Cluster, to select menu items
or to confirm changes.
Note: The Enter key has the same function
as the context-sensitive soft keys Select and
Set.
Press the Goodbye/Release key to
terminate an active call. When multiple calls
are active, press the Goodbye/Release key
to end the highlighted call.
Use the Goodbye/Release to close menu
navigation or cancel user tasks.
Press the Expand key to access the Instant
Messaging Log.
November 2013