Analog Terminator Adapter For Analog (500/2500-Type) Telephone Or Fax Machine - Avaya 1120E User Manual

Ip deskphone with sip
Hide thumbs Also See for 1120E:
Table of Contents

Advertisement

Analog Terminator Adapter for analog (500/2500-type) telephone or
fax machine
SIP Software Release 3.x and later supports the Analog Terminator Adapter (ATA) which is
connected using the USB port. An analog (500/2500-type) telephone or fax machine can be
connected to the ATA to convert the IP Deskphone to an analog system. The ATA is treated
as an USB Headset device by the IP Deskphone.
SIP Software 3.x and later supports On hook/Off hook and dial pad key events for HID support
to allow the attached device to make outgoing calls directly without using the key pad on the
IP Deskphone. If Calling Line ID (CLID) of the far-end is available, then the information is sent
to the attached analog device. An analog (500/2500-type) telephone or fax machine that
supports Calling Line ID displays the information on the screen.
The following table displays the characteristics of ATA.
Table 12: Summary of ATA characteristics
Key Events
LEDs
Attached Indicator
Back Light
Message Waiting
External Alerter
Incoming Call
Caller ID Information
Call Answer
Avaya 1120E IP Deskphone with SIP Software User Guide
Feature
Description
In addition to On hook, Off hook events, dial
pad digit events from the attached analog
device are also supported. Key press events
on the adapter are sent to the IP Deskphone
through the USB. After the IP Deskphone
receives these events, it maps them to the
corresponding key events as if the keys on
the IP Deskphone are pressed.
Not applicable.
Not applicable.
Not applicable.
Not applicable.
Not applicable.
When there is an incoming call, the IP
Deskphone sends an alerting event to the
adapter. The adapter produces the ring
tones for the attached analog device to
indicate there is an incoming call on the IP
Deskphone.
Caller ID, if available, is also sent to the
adapter. The adapter sends the CLID to the
attached analog device for display.
You can answer an incoming call by
pressing the Headset key on the IP
USB headset
November 2013
91

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents