Avaya 1120E User Manual page 276

Advanced features
same name may already exist, or actions on the selected file type may not be allowed
(configuration flag).
Error conditions display a message on the screen, as shown in the following example.
Figure 75: Sample failure message for File Manager operation
Copying the ring tone from the IP Deskphone to the USB drive
1. Log into the IP Deskphone and plug the USB flash drive into the USB port of the IP
2. Press the Services hard key and choose File Manager.
3. Select the IP Deskphone from the Select Device screen.
4. Navigate to the Sounds folder.
5. Select the file you require and press Send.
6. Navigate to the folder MyRings and press Done to start the operation.
Copy errors:
If file copying cannot complete due to insufficient space on the USB device, or due to the
selected file type not being enabled in the File Manager (device configuration), then an error
message is displayed on the screen.
276 Avaya 1120E IP Deskphone with SIP Software User Guide
Deskphone.
The contents of their IP Deskphone are displayed.
You are prompted to select the destination folder on the plugged-in USB drive.
The file is then validated (some files are not allowed to copy) and sent to the selected
destination. After the copy is complete, a message appears on the phone screen
displaying that the file was copied successfully.
Comments? infodev@avaya.com
November 2013