Usb Flash Memory Device Support - Avaya 1120E User Manual

• A is talking to B when A invokes their Speed Dial List and selects an entry.
• Selection/invocation of a Speed Dial List entry places the A-B call on hold and places an
outgoing call to the URI specified in the Speed Dial List entry; for example, C.
• When the A-C call completes, if the Auto-Retrieve flag is enabled for the Speed Dial, then
the IP Deskphone attempts to take call A-B off hold. This may not always happen if the
IP Deskphone receives another call during the A-C call, or if the A-B call state is changed
while A-C is active.
The Auto-Retrieve behavior is added to regular speed dial keys instead of speed dial list
entries. To make sure that this flag is configured for programmed speed dial keys, the Enable
Auto-Retrieve screen shown in the following figure appears as the last step in Speed Dial Key
configuration.
Figure 68: Enable Auto-Retrieve screen
The Auto-Retrieve screen allows you to configure the Auto-Retrieve behavior for the Speed
Dial.

USB flash memory device support

The IP Deskphone supports the browsing of files on a USB flash memory device. A simple file
browser allows you to select an image file (or other type of file) and upload onto the IP
Deskphone file system. The file manager also allows you to browse and copy certain files from
the phone file system onto a USB flash drive.
After you select the File Manager menu by choosing the Services menu, you can navigate to
the IP Deskphone file system and any USB drives attached. From there, you can either copy
Avaya 1120E IP Deskphone with SIP Software User Guide
USB flash memory device support
November 2013 265