The Media Jams - Roland SJ-1045EX User Manual

5-3 The Media Jams

The Media Jams
If an error message is displayed because the media
has jammed, immediately correct the problem. Fail-
ure to do so may damage the print heads.
p 100 [MOTOR ERROR TURN OFF POWER]
Is the media warped or wrinkled?
Many factors can cause warping or wrinkling. Refer to
the following and correct the problem.
p 97 "Media Wrinkles or Shrinks, or Feed Is Un-
stable"
Is the height of the print heads too low?
Try raising the heads higher. Media may inevitably warp
or wrinkle slightly, so adjust the height of the heads to
take this into account.
p 68 "Adjusting Head Height to Match Media Thick-
ness"
Downloaded From ManualsPrinter.com Manuals
Chapter 5 What to Do If 95