Cleaning - Roland SJ-1045EX User Manual

Cleaning

Pinch rollers
Periodically wipe away any
grime. Failure to clean prop-
erly may result in the trans-
fer of grime to the surface of
media.
Grit rollers
Remove buildup of media
and other material using a
brush. Never use a metal
brush.
Clean this area especially
well. Any soiling present
here may impair detection of
media width.
Wipe away any buildup of
ink or grime on the media
path.
WARNING
CAUTION
This machine is a precision device, and is sensitive to dust and dirt. Perform cleaning on a daily basis.
Clean by wiping with a cloth moistened by neutral detergent diluted with water then wrung dry.
Never use a solvent such as thinner or benzine.
Never attempt to oil or lubricate the machine.
Downloaded From ManualsPrinter.com Manuals
Never use gasoline, alcohol, thinner, or any other flammable material.
Doing so may cause fire.
Before attempting cleaning, switch off the power and wait until the platen and
dryer cool (approximately 30 minutes).
Sudden movement of the machine may cause injury, or hot components may cause burns.
3-1 Daily Care and Maintenance
Chapter 3 Maintenance and Adjustment 51