Roland SJ-1045EX User Manual page 33

4.
Pass the media through the printer and adjust the balance weights.
Before you pass the media through, move the balance weights to match the width of the media.
Downloaded From ManualsPrinter.com Manuals
When 1220 to 1372 mm
(48 to 54 inches)
When 1373 to 2032 mm
(54 to 80 inches)
When 2033 to 2641 mm
(80 to 104 inches)
Pass the media through the rollers until its end reaches the
platen.
Work from the back of the printer.
Pull back the loading lever to keep the threaded media
from slipping and falling off.
2-2 Loading and Cutting Off Media
Tighten
Balance weight
Chapter 2 Operation
Loosen
31