Settings Of Preheater, Print Heater And Dryer; What Are The Preheater, Print Heater And Dryer - Roland SJ-1045EX User Manual

2-3 Settings of Preheater, Print Heater and Dryer

What Are the Preheater, Print Heater and Dryer?

This machine is equipped with three devices for heating media. You use these mainly to improve ink adhesion
and dry the ink. You can adjust the temperature settings to match the type of media and printing speed.
Preheater
This device warms the media before
printing.
Print heater
This device is used mainly to improve
ink adhesion.
Dryer
You use this to speed up drying of the
ink.
WARNING
WARNING
WARNING
40 Chapter 2 Operation
Downloaded From ManualsPrinter.com Manuals
The platen and dryer become hot. Exercise caution to avoid fire or burns.
Never leave media loaded in the machine when printing is not being performed.
The continued application of heat at a single location may cause fire or produce toxic gases.
When printing is not being performed, switch off the power or remove any loaded media.
Never use media that cannot withstand the heat.
Doing so may result in fire or the release of toxic gases, or may degrade the media.