2.
Mount the roll shaft in the paper pipe.
Hexagonal wrench
End cap
Downloaded From ManualsPrinter.com Manuals
Press in to fit on securely.
(large)
Spacer
Adjust the end cap to a position of 75 to 100 mm
(3 to 4 in.).
* When using media having a width of 2,540 mm
(100 inches) or more, be sure to position the
media at 100 mm.
* The scale on the media gauge is useful for ad-
justing the position.
Press in to fit on securely.
Paper pipe
Roll shaft
2-2 Loading and Cutting Off Media
Hexagonal wrench
(large)
End cap
75 to 100 mm (3 to 4 in.)
Chapter 2 Operation
29