Roland SJ-1045EX User Manual page 37

Use adhesive tape to fasten the media securely to the paper pipe.
Apply the adhesive tape at intervals of about 20 to 30 cm (10 inches).
Take-up with outward curl
Take-up with inward curl
Downloaded From ManualsPrinter.com Manuals
Paper pipe Adhesive tape
20 to 30 cm
(approx. 10 in.)
10 mm (0.4 in)
or lager
Paper pipe Adhesive tape
20 to 30 cm
(approx. 10 in.)
10 mm (0.4 in)
or lager
2-2 Loading and Cutting Off Media
10 mm (0.4 in)
or lager
10 mm (0.4 in)
or lager
When this is 10 mm (0.4 in.) or
less, go back to Step 1 and re-
adjust the location of the end
cap.
When this is 10 mm (0.4 in.) or
less, go back to Step 1 and re-
adjust the location of the end
cap.
Chapter 2 Operation 35