Roland SJ-1045EX User Manual page 58

3-3 Cleaning the Heads Using the Cleaning Kit
1.
Change to the print-head manual-cleaning mode.
2.
Remove the left and right side covers.
Remove the left and right side covers.
Touch the location shown in the figure to discharge any static electricity.
56 Chapter 3 Maintenance and Adjustment
Downloaded From ManualsPrinter.com Manuals
MAINTENANCE
CLEANING
FINISHED
CLEANING ?
Screws
Remove any media from the platen and close the front
cover.
Switch off the sub power.
Hold down and switch on the sub power.
Press to choose [CLEANING].
Press .
Preparations are complete when this screen appears.
Screws