Specifications - Roland SJ-1045EX User Manual

6-4 Specifications

Printing method
Loadable media width
Printable area
Ink
Resolution
Printing speed
Distance accuracy
Media take-up
system
Media feed system Roll outer diameter
Media dryer
Ink-fixing device
Interface
Power-saving function
Power supply
Power consumption During operation
Acoustic noise level During operation
Dimensions
Weight
Environment
Included items
*1
At Roland PET film, print travel: 1 m
Temperature: 25°C (77°F), humidity: 50%
Not assured when the print heater, preheater or dryer is used.
*2
Operating environment
Humidity
Downloaded From ManualsPrinter.com Manuals
Piezo ink-jet method
1220 to 2641 mm (48 to 104 in.)
Maximum width: 2600 mm (102.3 in.)
Exclusive ECO-SOL INK
Type
4 colors (cyan, magenta, yellow, and black)
Colors
Maximum 1440 dpi
Maximum approx. 45 m
Error of less than ±0.3% of distance traveled, or 0.3 mm, whichever is
(*1)
greater
Maximum 250 mm (9.8 in.)
Roll outer diameter
Maximum 100 kg (220 lb.)
Roll weight
Maximum 250 mm (9.8 in.)
Maximum 100 kg (220 lb.)
Roll weight
Heating method
Preheater and print heater
Ethernet (10BASE-T/100BASE-TX, automatic switching)
Automatic sleep
AC 200 to 240 V ±10%, 50/60 Hz
Voltage and frequency
10 A
Required power capacity
Approx. 2400 W
Approx. 55 W
Sleep mode
65 dB (A) or less (according to ISO 7779)
40 dB (A) or less (according to ISO 7779)
During standby
3894 (W) x 1159 (D) x 1394 (H) mm (153.4 (W) x 45.7 (D) x 54.9 (H) in.)
455 kg (1003 lb.)
(*2)
Temperature: 20 to 32˚C (68 to 89.6˚F), humidity: 35 to 80% (no con-
Power on
densation)
Temperature: 5 to 40˚C (41 to 104˚F), humidity: 20 to 80% (no conden-
Power off
sation)
Power cord, roll shafts, end caps, spacers, media reinforcement pipe,
paper pipe, drain bottle, media gauge, media clamps, hexagonal
wrenches, cap-unit tool, cleaning kit, cleaning liquid cartridges, soft-
ware RIP, Roland-PrintServer CD-ROM, User's Manual, Setup Guide,
Roland-PrintServer Network Settings Guide
Use in an operating environment with this range.
Temperature
SJ-1045EX
2 /h
Chapter 6 Specifications 107