Roland SJ-1045EX User Manual page 60

3-3 Cleaning the Heads Using the Cleaning Kit
4.
Reattach the side covers and quit the manual cleaning mode.
Attach the left and right side covers.
Press
After the processing to quit the manual cleaning mode ends, the sub power is switched off.
5.
Perform a printing test to verify the results of the procedure.
Perform a printing test to check the results.
Perform automatic cleaning several times as required.
58 Chapter 3 Maintenance and Adjustment
Downloaded From ManualsPrinter.com Manuals
Screws
.
Screws