Loading And Cutting Off Media; How To Load Media - Roland SJ-1045EX User Manual

2-2 Loading and Cutting Off Media

How to Load Media

WARNING
WARNING
CAUTION
Never overly loosen the screws for the end caps.
When an end cap screw is loosened completely, it stops
turning. Never apply more force beyond that point. At-
tempting to turn the screw with undue force may dam-
age the component securing the screw, making return to
the original state impossible.
26 Chapter 2 Operation
Downloaded From ManualsPrinter.com Manuals
When loading or moving roll media, be sure to use load-handling equipment such
as a lifter and carry out operations with care to prevent falls or other accidents.
Some roll media may weigh about 100 kg (220 lb.). Attempting manual lifting operations that
tax your strength may cause physical injury. Also, if dropped, such items may cause unexpected
injury, such as crushing of the feet.
Never use media less than 1,220 mm (48 inches) in width.
The platen may overheat, resulting in fire or the release of toxic gases.
Be sure to perform operations as specified by these instructions, and never touch
any area not specified in the instructions.
Sudden movement of the machine may cause injury.