D8129 Address Settings - Bosch B9512G Installation And System Reference Manual

170 en | Appendix
ZONEX 1
(Points 9 -
127
89 - 96
97 - 104
105 - 112
113 - 120
121 - 127
*Line termination switch. Refer to Switch 5 settings for line termination, page 170.
+Supported by the B9512 only.
Notice!
For the D8128D OctoPOPITs assigned to Points 121 to 127, 241, and 247, set Point Input
Switch 8 to the OPEN position.
The B9512G uses Points 9 to 127 on ZONEX 1 and Points 129 to 247 on ZONEX 2.
B8512G uses only Points 9 to 99 on ZONEX 1.
Switch 5 settings for line termination
If a D8125 POPEX module is connected, set switch 5 of only one D8128D to ON.
If a D8125 POPEX module is not connected, set switch 5 of all D8128Ds to OFF.
22.1.5

D8129 address settings

The D8129 connects to the control panel through a B600.
Octo-relay module address setting
Off-On-On-On-On
On-Off-On-On-On
Off-Off-On-On-On
On-On-Off-On-On
Off-On-Off-On-On
On-Off-Off-On-On
Off-Off-Off-On-On
On-On-On-Off-On
Off-On-On-On-On
On-Off-On-On-On
Off-Off-On-On-On
On-On-Off-On-On
Off-On-Off-On-On
On-Off-Off-On-On
Off-Off-Off-On-On
2016.06 | 08 | F.01U.303.996
D8128D Address Switches
OFF ON
OFF ON
OFF OFF
OFF OFF
OFF OFF
Installation and System Reference Guide
OFF ON
OFF OFF
ON ON
ON OFF
OFF ON
Control panel relay number
1 – 8
9 – 16
17 – 24
25 – 32
33 – -40
41 – 48
49 – 56
57 – 64
65 – 72
73 – 80
81 – 88
89 – 96
97 – 104
105 – 112*
113 – 120*
Control Panels
ZONEX 2
(Points 129
– 247)+
* 209 - 216
* 217 - 224
* 225 - 232
* 233 - 240
* 241 - 247
ZONEX Number
1
1
1
1
1
1
1
1
2
2
2
2
2
2*
2*
Bosch Security Systems, Inc.