Installation And Control Panel Wiring (B299); Popit Devices Overview And Wiring - Bosch B9512G Installation And System Reference Manual

Hide thumbs Also See for B9512G:
Table of Contents

Advertisement

Control Panels
With any failure to receive an expected response from the module, all keypads show a system
fault. The control panel sends a module trouble report to the central station (if configured for
module trouble reports).
13.2.3

Installation and control panel wiring (B299)

Ensure that there is enough power for the module and other powered devices you want
connected to the system.
Refer to On-board outputs, page 66.
Caution!
Remove all power (AC and battery) before making any connections. Failure to do so might
!
result in personal injury and/or equipment damage.
Install the module
1.
2.
3.
When you wire an SDI2 module to a control panel, you can use either the terminal strip
labeled with PWR, A, B, and COM to wire to corresponding terminals labeled 27 through 30
(or 23 through 26 if configured for SDI2) on the control panel, or you can use the interconnect
wiring connector and the included interconnect cable.
For terminal wiring, use 18 AWG to 22 AWG (1.02 mm to 0.65 mm) wire.
Notice!
Use either the terminal strip wiring or interconnect wiring to the control panel. Do not use
both. When connecting multiple modules, you can combine terminal strip and interconnect
wiring connectors in series.
13.2.4

POPIT devices overview and wiring

Wire resistance on each sensor loop must be less than 100 Ω with the detection devices
connected. The terminal strip supports 12 to 22 AWG (2.0 to 0.65 mm) wires.
Figure 13.17: B299 POPEX expansion loop wiring
Bosch Security Systems, Inc.
Set the module address using the address switches before you install it in the enclosure.
Install the module in the enclosure with the control panel or in an adjacent enclosure that
is within the distances rated for the module: 200 ft (60 m) with 22 AWG (0.65 mm) wire
or 500 ft (152 m) with 18 AWG (1.02 mm) wire.
Use the screws provided with the module to secure the module in the enclosure.
2
3
1
- -
+
+
(-)
(-)
(+)
(+)
Installation and System Reference Guide
2
4
5
- -
+
+
Off-board points | en
(-)
(-)
(+)
(+)
2016.06 | 08 | F.01U.303.996
79

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

B9512g-eB8512g-eB8512g

Table of Contents