Substitute Memory Reception; Print Collation Mode - Panasonic Panafax UF-6200 Operating Instructions Manual

Receiving Documents

Substitute Memory Reception

If the recording paper runs out or jams or if the toner runs out during reception, the machine automatically
starts receiving documents in its image data memory. Stored documents are printed automatically after
replacing the recording paper or the toner cartridge. (See Note 1 and 2)
1
2

Print Collation Mode

The printing mechanism of the machine features a Reverse Order Stacking construction. The machine has
Print Collation Mode that stacks received documents in the correct order. When the Print Collation Mode is
enabled, all received documents are stored into the memory first, and then printed out in Correct Order
Stacking. The requirements for the Print Collation Mode to be active are:
1) Fax Parameter No. 65 (PRINT COLLATION) set to "VALID". (See page 39)
2) sufficient remaining memory
The unit will print in Reverse Order Stacking (Non-Collation Mode) whenever one of the above requirements
is not met.
Sending Document Order
NOTE
74
When the machine finishes the memory reception and
there is no recording paper or toner, an Information Code
appears on the display.
Install the recording paper (See page 20) or replace the
toner cartridge (See page 18).
The machine will automatically start printing the document
stored in the memory.
1
2
3
1. If the memory overflows, the machine will stop receiving and release the communication line.
The document(s) stored in the memory up to that moment will be printed out.
2. If you wish to turn off the substitute reception function, change the setting of Fax Parameter
No. 22 (SUBSTITUTE RCV) to "INVALID". (See page 37)
Stacking Document Order
Correct Order Stacking
(Collation Mode)
1
2
3
NO RECORDING PAPER
INFO. CODE=010
OUT OF TONER
INFO. CODE=041
* PRINTING *
MEMORY RCV'D DOC
Reverse Order Stacking
(Non-Collation Mode)
3
2
1