Panasonic Panafax UF-6200 Operating Instructions Manual page 160

Glossary
Fixed print reduction
FUNCTION
G3 mode (Group 3)
Group dialing
HALFTONE
Handshaking
Header
ITU-T
ITU-T Image No.1
ID
Image memory capacity This signifies the amount of memory available in your unit capable of storing pages of
Individual Transmission
Journal
Information code
Initial sending station
Journal
Keypad
LCD
LOGO
Multiple Logo
Manual reception
Memory transmission
Modem
Multi-station
transmission
Network address
Network password
Off-hook dialing
On-hook dialing
One-Touch dialing
160
The method that allows you to determine one reduction rate, such as 75%, for all incoming
documents.
The control panel key that will be utilized to begin an operation or configuration of a feature.
Refers to the standards and transmission capabilities of the current generation of facsimile
machines.
The ability to program many telephone numbers into a single station so that many locations
can be dialed in sequence utilizing a single keystroke.
A scanning technique to distinguish levels of gray from black and white. Your machine can
detect up to 64 levels of gray in halftone mode.
The exchange of a group of control signals that communicate between the transmitter and
receiver. These signals determine the condition at which communication can occur.
A row of information that is transmitted by the sending machine and printed at the top of each
page by the receiving unit. This identifies the transmitting unit and information about the
transmission, such as time and date.
International Telecommunication Union - Telecommunication, formerly known as C.C.I.T.T.
An industry standard document that allows comparisons of the transmission speeds and
capabilities of facsimile machines.
A programmable address of up to 20 digits identifying your machine.
documents. All page units of measure are based on the ITU-T Image No.1.
A report that is printed by the transmitting unit stating information regarding the last document
transaction.
A code that is internally generated by your Fax stating a specific operational error or machine
failure.
In a relay network, the station that is originating the document transmission.
A report that is printed by your unit listing the last 32 transactions.
A group of numeric keys located on your control panel.
Liquid Crystal Display. The display area of your machine.
Your programmed company name or identification up to 25 alphanumeric characters.
The user can select one of 25 preset LOGOs before a transmission.
A mode that requires operator intervention to receive an incoming document.
The documents are scanned into memory before actual connection to the phone line for
transmission.
A device that converts signals from your fax machine into signals that can be transmitted
over telephone lines.
The ability to broadcast the same set of documents to a programmed number of locations.
An individual 4-digit addressing number assigned to a One-Touch/ Abbreviated number that
identifies a particular station in a relay network.
A 4-digit password assigned to a network address to prevent unauthorized stations from
accessing a relay station.
The direct dialing of a telephone number with the handset out of the cradle or "off the hook."
The direct dialing of a telephone number with the handset in the cradle or "on the hook."
The ability to dial an entire telephone number by pressing one key.