Telephone Mode - Panasonic Panafax UF-6200 Operating Instructions Manual

Telephone Mode

When your machine is set to this mode, it will not receive documents automatically. If you receive a fax call,
follow the procedure below to receive documents manually.
Setting the Telephone Mode
1
Change Fax Parameter No. 17 (RECEIVE MODE) to 1: Tel.
(See page 36)
Operation of Telephone Mode
1
When your telephone rings, lift the handset of the External
Telephone.
If you hear a beep from the phone, it means someone
wants to send a fax. Or, if the caller answers and says he/
she wants to send a fax, then...
2
Remove any document from the ADF.
3a
If you answered the call using the External Telephone,
3b
If you answered the call on an Extension phone,
or
within 1 second from the telephone key pad. (See Note 1)
4
Hang up the phone.
1. This procedure is called "REMOTE RCV" and will only work on a touch tone phone. If your
NOTE
extension phone is not a touch tone phone, press
machine.
Your machine will be activated remotely.
Receiving Documents
Start on the control panel of your fax
67