Panasonic Panafax UF-6200 Operating Instructions Manual page 56

Sending Documents
Wrong Transmission Prevention Function
Address Confirmation Function
Settings can be made so that transmission will always start after confirming the address.
When
Start
confirm the address will be displayed if the address has not been confirmed first.
This function operates if setting "125 CONFIRM STATIONS" of Fax Parameter set to "VALID".
(See page 40)
When telephoning from an external telephone, address confirmation is not displayed.
1
2
3
NOTE
56
is pushed and address confirmation has been set, a message prompting operations to
Operate "Manual Number Dialing". (See page 49)
This function is also available if you send documents with
following methods:
• One-Touch Dialing (See pages 51 and 85)
• Abbreviated Dialing (see page 51)
• Group Dialing (See page 81)
Press or to confirm stations.
It is possible to add or remove addresses. To add an
address, input the address for addition. To remove an
address, display the address for removal and press
(See Note 1).
Clear
The document is stored with a file number in the memory.
Following this, the telephone numbers are dialed in
sequence.
1. If an address has been added or removed when confirming addresses, address confirmation is
required again.
∨ ∧
CONFIRM STN WITH
THEN PRESS START
* DIALING * NO.002
5551234