Panasonic Panafax UF-6200 Operating Instructions Manual page 138

Troubleshooting
Troubleshooting
Mode
Print Copy Quality
Communication
No Unit Operation
138
Symptom
Vertical lines printing
Print out a Journal report (
on the received
and check quality to make sure whether your machine has
document
trouble.
If Journal report quality is OK, your machine has no problem,
report to the sending party that they have a problem.If copy is
NG, replace the Toner Cartridge.
Fuzzy print 1. Make sure you are using the correct paper for the best
2. Try reversing the recording paper to the other side.
Missing dots or lines/ 1. Make sure you are using the correct paper for the best
inconsistent darkness
within print 2. Replace the Toner Cartridge.
Fading print Your Toner Cartridge may be running out of toner. Replace
the Toner Cartridge.
Faint print You may need to choose a different paper type for the best
possible print quality.
No dial tone 1. Check the connection of the telephone line.
2. Check the telephone line.
1. Check the connection of the telephone line.
No auto answer 2. Check the Reception mode setting.
3. If the Fax Parameter No. 13 (AUTO JRNL PRINT) is set to
Cannot transmit or An information code will be shown on the display. Refer to the
receive information code table to find out the trouble.
No unit operation To reset the machine, unplug the Power Cord for a few
seconds then plug it in again.
Cause / Action
Ex:
possible print quality.
possible print quality.
"VALID" (Default setting) and the machine is printing the
received document from memory, which also happens to
be the 32th transaction, the machine will not auto answer
until the Transaction Journal completes printing.
FUNCTION, 6, 1 , SET and 1)
page
125
18
153
153
18
18
153
150
150
66
141
17