Panasonic Panafax UF-6200 Operating Instructions Manual page 142

Troubleshooting
Information Codes
Info.
Code
412 No data from the transmitting side.
414 Polling password does not match.
415 Polling transmission error.
416/417 Received data has too many errors.
418/419
420/421 Machine goes to receiving mode, but receives no
command from the transmitting side.
422/427 Interface is incompatible.
434 Communication error occurred while receiving.
436/456 Received data has too many errors.
490
456
492/493 Communication error occurred while receiving.
494
495 Telephone line disconnected.
501/502 Communication error occurred using the internal V.34
Modem.
540/541 Communication error occurred while transmitting.
542/543
544
550 Telephone line disconnected.
554/555 Communication error occurred while receiving.
580 Sub-address transmission to a unit that has no Sub-
address function.
581 Sub-address Password transmission to a unit that has
no Password Sub-address function.
623 No document loaded on the ADF.
630 Redial was not successful due to a busy line.
631 During dialing, STOP was pressed.
634 Redial was not successful due to no response from
the called station or wrong number dialed.
Note:
only redial once.
638 Power failure occurred during the communication.
800/816 Unit was requested to relay a document or
825 Confidential Communication but has no capability.
142
Meaning
• Unit received a confidential document or was
requested to be polled of a confidential document
under any of following conditions.
1. Not enough space in memory to receive the
confidential document.
2. Confidential Mailbox is full.
3. While printing received document.
• Unit was requested to relay a document.
If busy tone was not detected, the machine will
Action
Check with the other party.
Check the polling password.
Check the polling password.
Check with the other party.
1. Remote side misdial.
2. Check with the other party.
Check with the other party.
Check with the other party.
Check with the other party.
1. Print a File List and check the contents.
2. Wait until unit finishes printing.
Check with the other party.
Check with the other party.
Check with the other party.
1. Reload the document and send again.
2. Check with the other party.
Check with the other party.
Check with the other party.
Check the remote station.
Check the remote station.
Reload the document and send again.
Reload the document and send again.
Reload the document and send again.
Check the telephone number and send again.
Check the power cord and plug.
Check with the other party.
page
--
78
78
--
--
--
--
--
87
--
--
--
--
--
--
122
122
--
--
--
--
17
--