Substitute Memory Reception; Print Collation Mode - Panasonic DX 1000 - PanaFax B/W Laser Printer User Manual

04010000001

Substitute Memory Reception

If the recording paper runs out or jams or if the toner runs out during reception, the machine automatically
04004010009
starts receiving documents into its image data memory. Stored documents are printed automatically after
replacing the recording paper or the toner cartridge.
1
04004040009
04004060024
2
04004060025
Note:
04004070010
04010070001
04004070012

Print Collation Mode

The printing mechanism of the DX-1000 is a Reverse Order Stacking construction. The DX-1000 has a Print
04004020012
Collation Mode that stacks received documents in the correct order. When the Print Collation Mode is
enabled, all received documents are stored into memory first, then printed out in Correct Order Stacking.
The requirements for the Print Collation Mode to be active are; 1) Fax Parameter No. 65 PRINT COLLATION
set to "Valid", and 2) enough remaining memory.
The unit will print in Reverse Order Stacking (Non-Collation Mode) whenever one of the above requirements
is not met.
Sending Document Order
04004050004
Receiving Documents via Telephone Line
When the machine finishes the memory reception and
there is no recording paper or toner, an Information Code
appears on the display.
Install the recording paper (see page 30) or replace the
toner cartridge (see page 28).
The machine will automatically start printing the document
stored in the memory.
1. If the memory overflows, the machine will stop receiving and release the communication line.
The document(s) stored in the memory up to that moment will be printed out.
2. If a power failure occurs, the document information stored in memory will be saved for up to 1 hour, when
the battery is fully charged.
3. If you wish to turn off the substitute reception function, change the setting of Fax Parameter No. 22 to
"Invalid" (see page 61).
1
2
3
Stacking Document Order
Correct Order Stacking
(Collation Mode)
1
2
3
NO RECORDING PAPER
INFO. CODE=010
OUT OF TONER
INFO. CODE=041
* PRINTING *
MEMORY RCV'D DOC
Reverse Order Stacking
(Non-Collation Mode)
3
2
1
4
103