Wrong Transmission Prevention Function - Panasonic Panafax UF-6200 Operating Instructions Manual

Sending Documents

Wrong Transmission Prevention Function

The following functions have been provided to prevent transmission to a wrong address.
These include the dial re-enter function to prohibit direct dialing or multiple addresses, and a function to
confirm the address.
Direct Dial Restriction Function
This function prohibits all designations of addresses by direct dialing (Including manual transmission). This
function operates if Fax Parameter "136 RESTRICT D. DIAL" of Fax Parameter set to "VALID". (See page
40)
• If this function is set, even when telephoning from an external device, it is not possible to use direct dialing.
However, if direct dialing standby is displayed, press
If keypad or
your display.
Multiple Address Prohibit Function
With this device, it is possible to combine direct dialing and AUTO dialing, etc. to send the same document
by fax to multiple addresses. If you do not wish to send to multiple addresses, set setting "117 MULTI
STATION" of Fax Parameter set to "INVALID" and the system will be set to transmit to only one address.
This is useful to prevent mistaken transmission to multiple addresses.
If you specify multiple addresses, the following message will appear on your display.
NOTE
54
Redial/Pause
are pressed, the following message will appear on
1. If multiple address designation is set to "INVALID", it is not possible to transmit to multiple
addresses.
2. If multiple address designation is set to "INVALID", it is not possible to use group dial.
3. If multiple address designation is set to "INVALID", it is possible to use the program dial in
which multiple addresses are set.
to start redial.
Redial/Pause
DIRECT DIAL IS
NOT AVAILABLE
NOT AVAILABLE.
ONLY 1 STN PERMITTED