Setting Your Id Number (Fax Telephone Number) - Panasonic Panafax UF-6200 Operating Instructions Manual

Setting Your ID Number (Fax Telephone Number)

If the remote machine does not have a Character ID but has an ID Number, when sending or receiving, your
ID Number will appear on the remote machine's display and their ID Number will appear on your display.
We suggest you use your facsimile telephone number as your ID number. (Up to 20 digits)
1
7
2
1
3
4
Enter your ID (up to 20 digits) by using the keypad and
press the
Ex:
2 0 1
If you made a mistake, use
one space beyond the incorrect number, press
and then re-enter the new number.
5
NOTE
1. You may use
following digit(s) for your country code.
Ex:
2. Your Fax Telephone Number must be set as your ID Number because it is required by the
Telephone Consumer Act of 1991. (For details, see FCC NOTICE at the end of this Operating
Instructions)
repeatedly until display shows;
key to enter a space between numbers.
5 5 5
or to move the cursor
to enter a "+" character at the beginning of the ID number to indicate the
+1 XXX XXX XXXX+1 for U.S.A. country code.
+81 X XXX XXXX +81 for Japan country code.
User Parameters
SET MODE
ENTER NO. OR
1:USER PARAMETERS?
PRESS SET TO SELECT
ID NO.
ID NO.
201 555 1212
1 2 1 2
Clear
(1-8)
∨ ∧
29