Panasonic Panafax UF-6200 Operating Instructions Manual page 128

Journals and Lists
Individual Transmission Journal (IND. XMT JOURNAL)
Explanation of Contents
(1) Printout date
(2) Printout time
(3) Journal number
(4) Communication results
(5) Number of pages transmitted
or received
(6) File number
(7) Duration of communication
(8) Type of communication
(9) Remote station identification
(10) Communication date
(11) Communication Start time
(12) Diagnostic
(13) Own LOGO
(14) Own ID number
(15) Own Character ID
(16) Type of communication
(17) Destination
(18) Received remote station's ID
(19) Resolution
128
"OK" indicates that the communication was successful.
"BUSY" indicates that the communication has failed because of busy line.
"STOP" indicates that STOP was pressed during communication.
"M-OK" indicates that the substitute reception message in memory was not
printed out.
"P-OK" indicates that memory overflow or document misfeeding occurred while
storing the documents into the memory for transmission but successfully stored
document(s) was sent.
"R-OK" indicates that the Confidential Communication was successful.
"- -" indicates LAN transmission.
"3-digit Info Code (See page 141) indicates that the communication has failed.
The 3-digit number is the number of pages successfully transmitted or received.
When the documents are stored into the memory, two 3-digit numbers will appear.
The first 3-digit number represents the number of pages successfully transmitted.
The second 3-digit number represents the total number of pages for which
transmission was attempted.
Asterisk "*" indicates that the quality of some received copies was poor.
001 to 999 (If the communication is stored into the memory, a file number is
assigned for each communication.)
"XMT" means Transmission
"RCV" means Reception
"POL" means Polling
"PLD" means Polled
"FWD" means Fax Forward
"RMT" means Remote Diagnostic/Firmware Update
Name : Recorded name in One-Touch or ABBR. Numbers or remote station's
Character ID.
number : Dialed telephone number
Number : Remote station's ID number.
For service personnel only
The 2-digit number is the number of final destinations.
" STN(S) LAN" indicates LAN transmission.
"(MDN) LAN" indicates LAN transmission with Delivery Notice.
"(Comm. JNL) LAN" indicates LAN transmission for Communication Journal.
Up to 25 characters
Up to 20 digits
Up to 16 characters
Transmission or memory transmission
If a One-Touch or ABBR was used for the transmission:
One-Touch or ABBR. No./Telephone Number(Or Email address)/Recorded Name
If not : Telephone number (Or Email address)
Character ID or ID number
"STD" means standard resolution
"FINE" means fine resolution
"S-FINE" means super fine resolution