Memory Transmission - Panasonic Panafax UF-6200 Operating Instructions Manual

Memory Transmission

Manual Number Dialing
To dial the telephone number manually, follow the steps below.
1
2
Enter a telephone number from the keypad.
(Up to 36 digits)
You can also designate more than one destination.
Ex:
5 5 5 1 2 3 4
3
The document is stored into memory with a file number.
It then starts dialing the telephone number immediately
after storing the first page. (See Note 3)
The remaining page(s) continue to be stored into memory.
1. If you need a special access number to get an outside line, dial it first then press
NOTE
Ex: 9 PAUSE 5551234
2. If you are using Pulse dialing and you wish to change to Tone dialing in the middle of dialing,
press
dialing the digit "/".
Ex : 9 PAUSE * 5551234
3. This feature is called "Quick Memory Transmission". If you wish to store all the document(s)
into memory first before transmitting, change the Fax Parameter No. 82 (QUICK MEMORY
XMT) to "INVALID". (See page 39)
Set document(s) face down.
Redial/Pause to enter a pause (represented by a "-") before dialing the full number.
(represented by a"/"). The dialing method will be changed from Pulse to Tone after
Sending Documents
ENTER STATION(S)
THEN PRESS START 00%
TEL. NO.
5551234
* STORE *
PAGES=001
* DIALING *
5551234
NO.002
05%
NO.002
49