Free Parameter; Setting Multiple Parameters As A Batch - Mitsubishi FR-A800 Instruction Manual

Parameters referred to ???????
Pr.77 Parameter write selection
Pr.160 User group read selection
Pr.550 NET mode operation command source selection
Pr.551 PU mode operation command source selection
5.7.14

Free parameter

Any number within the setting range of 0 to 9999 can be input.
For example, these numbers can be used:
• As a unit number when multiple units are used.
• As a pattern number for each operation application when multiple units are used.
• As the year and month of introduction or inspection.
Pr. Name
888
Free parameter 1
E420
889
Free parameter 2
E421
NOTE
• Pr.888 and Pr.889 do not influence the operation of the inverter.
5.7.15

Setting multiple parameters as a batch

Parameter settings are changed as a batch. Those include communication parameter settings for the Mitsubishi's
human machine interface (GOT) connection and the parameter setting for the rated frequency settings of 50 Hz/60 Hz
and acceleration/deceleration time.
Multiple parameters are changed automatically. Users do not have to consider each parameter number. (Automatic
parameter setting mode)
Pr. Name
999
Automatic parameter setting
E431

The read value is always "9999".
page 267
page 275
page 316
page 316
Initial value
9999
9999
Initial value
9999

(E) Environment setting parameters
Setting range
0 to 9999
Any value can be input. The settings are
retained even if the inverter power is
turned OFF.
0 to 9999
Setting range
1 Standard PID display setting
2 Extended PID display setting
GOT initial setting (PU
10
connector)
GOT initial setting (RS485
11
terminals)
GOT initial setting (PU
12
connector)
GOT initial setting (RS-485
13
terminal)
20 50 Hz rated frequency
21 60 Hz rated frequency
9999 No action
Description
Description
"Controller
Type" in GOT:
FREQROL
500/700/800,
SENSORLESS
SERVO
"Controller
Type" in GOT:
FREQROL
800(Automatic
Negotiation)
271
PARAMETERS
5
GROUP
E