Palm Tungsten T3 Handbook page 84

Chapter 5 Using Calendar
To set an alarm for an event:
Select the event to which you want to assign an alarm.
1.
Tap Details.
2.
Tap the Alarm check box to select it.
3.
The default setting, 5 Minutes, appears.
Tap the pick list to select Minutes, Hours, or Days.
4.
Select the 5 and enter any number from 0 to 99 (inclusive) as the number of time
5.
units.
Tap OK.
6.
When the reminder message appears onscreen, do one of the following:
7 .
– Tap OK to permanently dismiss the reminder and return to the current
screen.
– Tap Snooze to dismiss the reminder and return to the current screen. An
attention indicator blinks in the upper-left corner of the screen to remind you
of the pending alarm, and the reminder message appears again five minutes
later.
– Tap Go To to open Calendar. Calendar will open and display the event
associated with the alarm.
Alarm for untimed events:
case the alarm is triggered at the specified period of minutes, hours, or days before
midnight (beginning) of the day of the untimed event. When the alarm is triggered,
the reminder list displays the alarm message until you clear it. See
alerts"
For example, you set an alarm for an untimed event that occurs on February 4. If
the alarm is set for 5 minutes, the reminder message appears at 11:55 PM on
February 3. The reminder remains in the reminder list until you turn on your
handheld and dismiss it.
70
You can set a silent alarm for an untimed event. In this
in Chapter 4 for details.
Enter number of
time units here
Tap here to
select unit of time
"Receiving