Palm Tungsten T3 Handbook page 291

If you are a system administrator preparing several handhelds for a group of users,
you may want to create a user profile. See
chapter before performing the following steps.
You must perform your first HotSync operation with a local, direct
IMPORTANT
connection or with infrared communication, rather than with a modem.
The following steps assume that you have already installed Palm Desktop
software. See "Step 4: Run Palm Setup Wizard"
installed this software.
To perform a local HotSync operation on a Mac computer:
Place your handheld in the HotSync cradle/cable.
1.
Make sure that HotSync Manager is enabled: Double-click the HotSync
2.
Manager icon in the Palm folder. Click the HotSync Controls tab, and make sure
the Enabled option is selected.
Press the HotSync button
3.
The HotSync Progress dialog box appears, followed by the Select User
dialog box.
Conducting cradle/cable HotSync operations
"Creating a user profile"
in Chapter 1
on the cradle/cable.
later in this
if you have not
277