Palm Tungsten T3 Handbook page 70

Chapter 4 Working with Applications
Click OK.
4.
The selected files are placed in the Handheld or Expansion Card file list, based
on the file extension.
Perform a HotSync operation to install the files. See
5.
NOTE
not installed. This can happen if your handheld is too full to install the file or if
the file type was not recognized during the HotSync operation. If files are
unrecognized, try launching the associated application from your handheld
and then performing another HotSync operation. If the files still remain in the
list, they are not associated with an application on your handheld and cannot
be installed. Expansion cards may also hold files that are not Palm™
application files.
To drag and drop applications or files onto the Palm Quick Install window:
Copy or download the application(s) or file(s) you want to install onto your
1.
computer.
Double-click the Palm Quick Install icon on the Windows desktop.
2.
Handheld file list
Expansion card file list
From My Computer or Windows Explorer, select the file(s) or folder that you
3.
want to install.
Drag and drop the file(s) or folder onto the handheld or expansion card file list.
4.
If a No symbol appears when you attempt to drag a file onto a file list, the file
is not supported on that destination.
The status bar shows the number of files selected and their total size. However,
because some file types are compressed during synchronization, they may
actually require less space than the amount shown in the file size column or
status bar.
56
Files that remain in the list after you perform a HotSync operation were
Chapter 20 for details.
Status bar