Palm Tungsten T3 Handbook page 324

Chapter 21 Setting Preferences for Your Handheld
connection to perform a remote IR HotSync operation. To accomplish the HotSync
operation, your handheld sends data through its IR port to a modem within your
mobile phone, which then dials a modem attached to or within your desktop
computer, to synchronize with your Palm™ Desktop software.
To edit the IR to Phone connection:
From the Communications Preferences list, select Connection.
1.
Select the IR to GSM Phone connection.
2.
Tap Edit.
3.
Tap Details.
4.
Tap the Speed pick list and select the appropriate speed.
5.
Enter the initialization string supplied by the documentation for the modem in
6.
your mobile phone, if necessary.
Tap OK.
7 .
Tap OK again to save the configuration.
8.
After you create the configuration, you need to set up the HotSync Manager of
your Palm Desktop software and the HotSync application of your handheld to
perform a modem HotSync operation.
310
Tap here