Palm Tungsten T3 Handbook page 182

Chapter 16 Using Palm™ VersaMail™ Personal E-mail Software
Select the Get mail automatically check box.
4.
Set schedule options:
5.
Interval
Start Time
End Time
Days
Tap OK.
6.
(Optional) Tap Get Mail. You should perform a manual get mail after setting up
7 .
a scheduled auto get. This ensures that only new messages are retrieved during
auto get.
168
Tap the Every pick list and select the time interval, from
15 minutes to 12 hours. See
mail" later in this chapter for information on setting the
interval.
Tap the Start Time box, tap to enter the start time hour and
minute, and tap to enter AM or PM. Then tap OK.
The start and end time screens display the hour and
NOTE
minute using the default time format you select for your
handheld.
Tap the End Time box, tap to enter the end time hour and
minute, and tap to enter AM or PM. Then tap OK.
Tap the days you want the schedule to be active. You can
choose any number of days, but you can set up only one
schedule for each e-mail account.
"Resource issues with auto get