Palm Tungsten T3 Handbook page 126

Chapter 12 Using Phone Link
Select your phone from the list.
3.
If your phone doesn't appear on the list, tap Find More, and select your phone's
name when it appears on the list.
Tap Next.
4.
Your handheld connects to your phone.
When prompted to create a trusted connection, tap Next.
5.
Enter a passkey for this connection on your phone, and then tap OK.
6.
A passkey is a unique identifier that enables secure data exchange between two
Bluetooth devices that have formed a connection with each another. The
passkey is stored on both devices and you must enter the same passkey on both
your handheld and phone. If Phone Link is unable to validate the same passkey
on both your handheld and your phone, an error message appears and you are
given the option to try connecting again. If you need additional information
about connecting your phone, refer to the Phone Pairing Handbook at
www.palm.com/support
When prompted to create a trusted connection, tap Next.
7 .
Enter a passkey for this connection on your handheld, and then tap OK.
8.
112
.