Palm Tungsten T3 Handbook page 128

Chapter 12 Using Phone Link
Tap the Select your carrier pick list and select your mobile phone carrier.
5.
If your mobile phone carrier does not appear on the list, either you need to
download and install the settings for your mobile phone carrier (see
the phone files on your handheld"
supported at this time.
Tap Next.
6.
Tap Done.
7 .
To configure a dial-up connection:
After tapping Yes in step 11 of the
1.
phone connection:"
If you do not see the Network Service Setup screen, tap the Home icon
the Phone Link icon
Tap No when asked if you subscribe to a high-speed data service.
2.
Tap Next.
3.
A screen appears informing you that you are about to set up a dial-up
connection for your ISP.
Tap Next.
4.
Tap the Phone # field and enter the phone number you use to connect to
5.
your ISP.
Tap the Username field and enter the name you use when you log in to your ISP
6.
account.
114
later in this chapter) or your carrier is not
"To configure Bluetooth settings for your
procedure, tap Next on the Network Service Setup screen.
, and then tap the Network Service box.
"Updating
, select