Palm Tungsten T3 Handbook page 372

Appendix B Frequently Asked Questions
I get a warning message
telling me my handheld
memory is full.
My handheld keeps turning
itself off.
My handheld is not making
any sounds.
My handheld's indicator light
is not blinking when alarms
occur.
My handheld does not vibrate
when alarms occur.
My handheld has frozen.
358
Purge records from Calendar and Tasks. This deletes Tasks
items and past Calendar events from the memory of your
handheld. See "Purging records"
perform a HotSync operation to recover the memory.
Delete unused memos, photos, and records. If necessary,
you can save these records. See
Chapter 4. You must perform a HotSync operation to
recover the memory.
If you have installed additional applications on your
handheld, remove them to recover memory.
See "Removing applications"
Your handheld is designed to turn itself off after a period of
inactivity. This period can be set at 30 seconds or at one, two,
or three minutes. Check the Auto-off after setting on the Power
Preferences screen. See
Check the System, Alarm, and Game Sound settings.
See "Sounds & Alerts Preferences"
Check the Alarm indicator light setting. See
Alarm Vibrate settings"
Check the Alarm Vibrate setting. See
Vibrate settings" in Chapter
If a network connection was improperly terminated, your
handheld may appear to be frozen for up to 30 seconds. If
it is still frozen after 30 seconds, perform a soft reset.
Perform a soft reset. See
Appendix A.
If your handheld continues to freeze after a soft reset, check
your third-party applications for incompatible
applications. See "Problems with incompatible
applications" later in this chapter.
in Chapter
"Deleting records"
in Chapter 4.
"Power Preferences"
in Chapter
"Alarm LED and
in Chapter 21.
"Alarm LED and Alarm
21.
"Resetting your handheld"
4. You must
in
in Chapter 21.
21.
in