Palm Tungsten T3 Handbook page 125

Tap the Model pick list and select your phone model.
6.
If your phone model does not appear on the list, either you need to download
and install a driver for your phone (see
handheld" later in this chapter) or your phone is not supported at this time.
Tap Next.
7 .
Tap the Via pick list and select the method you want to use to connect:
8.
Bluetooth, Infrared, or Cable.
The Via pick list options vary based on the phone model.
Tap Next.
9.
If you selected Infrared or Cable in step 8, skip to
10.
settings for your phone"
complete the steps in the procedure that follows.
To configure Bluetooth settings for your phone connection:
For details, place your phone into the mode where it can accept Bluetooth
1.
pairing from another device. See the documentation that came with your
phone.
Wait for your handheld to discover your phone.
2.
When your handheld discovers a Bluetooth phone, it displays a screen similar
to the screen that follows.
"Updating the phone files on your
later in this chapter. If you selected Bluetooth in step 8,
Setting up a phone connection
"Configuring network service
111