Palm Tungsten T3 Handbook page 310

Chapter 20 Performing HotSync
Select the profile you want to load on the handheld, and click OK.
4.
Click Yes to transfer all the profile data to the handheld.
5.
The next time you perform a HotSync operation, Palm Desktop software prompts
you to assign a username to the handheld.
To use a profile for a first-time HotSync operation on a Mac computer:
Connect the new handheld to the HotSync cradle/cable.
1.
Press the HotSync button
2.
Select the profile you want to load on the handheld, and click OK to transfer all
3.
the profile data to the handheld.
The next time you perform a HotSync operation, Palm Desktop software prompts
you to assign a username to the handheld.
296
® Operations
on the cradle/cable.
Shown with Mac OS X