Palm Tungsten T3 Handbook page 302

Chapter 20 Performing HotSync
Click the Local tab.
3.
In the Serial port drop-down box, select the virtual serial port you chose or
4.
created in step 1.
Click OK.
5.
To prepare your Mac computer for a Bluetooth HotSync operation:
Double-click the HotSync Manager icon
1.
In the HotSync Controls tab, select Enabled.
2.
Click the Connection Settings tab, and select the On check box next to
3.
bluetooth-pda-sync-port.
Close the HotSync Software Setup window.
4.
288
® Operations
Select the port from the
drop-down list
in the Palm folder.
Shown with Mac OS X