Palm Tungsten T3 Handbook page 71

Perform a HotSync operation to install the files. See
5.
Files that remain in the list after you perform a HotSync operation were
NOTE
not installed. This can happen if your handheld is too full to install the file or if
the file type was not recognized during the HotSync operation. If files are
unrecognized, try launching the associated application from your handheld
and then performing another HotSync operation. If the files still remain in the
list, they are not associated with an application on your handheld and cannot
be installed. Expansion cards may also hold files that are not Palm application
files.
To use the command buttons in the Palm Quick Install window:
Copy or download the application(s) or file(s) you want to install onto your
1.
computer.
Double-click the Palm Quick Install icon on the Windows desktop.
2.
Add button
In the User drop-down list, select the name that corresponds to your handheld.
3.
Click Add.
4.
To install a folder, open the File menu and select Add Folder.
TIP
Select the application(s) or file(s) that you want to install.
5.
If you do not see the application(s) or file(s) in the default folder, navigate to the
folder that contains the application(s) or file(s) that you want to install.
Click OK.
6.
If you need to change the destination of the application you are installing, drag
7 .
the files to move applications between the handheld and expansion card file list.
The status bar shows the number of files selected and their total size. However,
because some file types are compressed during synchronization, they may
actually require less space than the amount shown in the file size column or
status bar.
Installing and removing applications
Chapter 20 for details.
User
drop-down
list
Status bar
57