Palm Tungsten T3 Handbook page 299

Tap the pick list below the icon and select a modem configuration.
4.
If you need to create a configuration, tap the Menu icon
Connection Setup on the Options menu. See
Chapter 21 for more information.
Tap the Enter phone # field.
5.
If you plan to connect to your company's dial-in server (network modem)
instead of connecting to a computer modem, see
HotSync operations"
Enter the telephone number to access the modem connected to your computer.
6.
If necessary, enter a dial prefix (such as "9") to access an outside line, and then
7 .
tap the Dial Prefix check box.
You can enter a comma in the field to introduce a "pause" in the dialing
TIP
sequence. Each comma equals a two-second pause.
If the phone line you're using for the handheld has Call Waiting, select the
8.
Disable call waiting check box to avoid an interruption during the modem
HotSync operation.
If you want to use a calling card to place the call, select the check box and enter
9.
the calling card number.
Tap OK.
10.
Select a modem
configuration
Tap here
later in this chapter.
Conducting modem HotSync operations
, and then select
"Connection Preferences"
"Conducting network
in
285