Konftel 300IP Manual page 48

Test Case #
Objective
Pre-Test Conditions
•
Local CUCMDUT(s):7100 & 7101; SCCP:1000; SIP:2000;
•
Remote CUCM DUT:8000;
•
PSTN: 2102225400;
•
Update softkey template on deviceSIP_EP_User (Includes MCID softkey)
•
RPC is used to remotely control IP Phones with DN: 1000, 2000;
Test Procedure
1. 7100 dials 71017101 answers7101 hits "MCID" softkey
2. 7101 goes on-hook after 30s
3. 8000 dials 444-71007100 answers7100 hits "MCID"
4. 8000 goes on-hook after 30s
5. 1000 dials 71007100 answers==7100 hits "MCID" softkey
6. 7100 goes on-hook after 30s
7. 2000 dials 71007100 answers7100 hits "MCID" softkey
8. 2000 goes on-hook after 30s
9. 2102225400 dials 941044471017101 answers
10. 7101 hits "MCID" softkey
11. 7101 goes on-hook after 30s
12. Retrieve CDR from CUCM
13. Check the Calling, Called, Duration, Origination & Termination
Cause Codes
© 2014 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public.
EP-40
Category
Functional Test: Malicious Call
Verify DUT(s) is able to mark a call malicious
Test Results: Comments
Not supported on DUT
Expected Results
•
3 calls establish with 2-way audio on 7100
•
2 calls establish with 2-way audio on 7101
•
Called parties marke as malicious
•
Call terminate normally
•
5 CDR(s) retrieved
•
Selected fields in CDR match calls
P
RFC_Standard
N
F N/A N/S N/T B
x
Page 48 of 64