Test Case #
Objective
•
Local CUCMDUT(s):7100 & 7101; SCCP:1000; SIP:2000;
•
Remote CUCM DUT:8000; SCCP:5200; SIP:6200;
•
Call Waiting enabled for all DN(s): DevicePhoneDNLineCall WaitingMax. Calls4; Busy Trigger2;
•
RPC is used to remotely control IP Phones: 1000, 2000, 5200, 6200;
1. 7100 dials 71017101 answers
2. 8000 dials 444-71007100 answers incoming call
3. 8000 goes on-hook after 30s
4. 1000 dials 71017101 answers incoming call
5. 1000 goes on-hook after 30s
6. 7100 goes on-hook after 60s
7. 7100 dials 10007100 answers
8. 2000 dials 71007100 answers incoming call
9. 2000 goes on-hook after 30s
10. 7100 goes on-hook after 60s
11. 6200 dials 444-71017101 answers
12. 5200 dials 444-71017101 answers incoming call
13. 5200 goes on-hook after 60s
14. 6200 goes on-hook after 30s
15. Retrieve CDR from CUCM
16. Check Calling, Called, Duration, Origination & Termination
Cause Codes
© 2014 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public.
EP-11
Category
Functional Test: Call Waiting
Verify Call Waiting calls between DUT(s), SIP and SCCP endpoints
Test Procedure
Test Results: Comments
Pre-Test Conditions
Expected Results
•
Call establish between 7100 & 7101 with 2-way audio
•
7100 notified of incoming call (tone /display)
•
7100 answers incoming call
•
7101 is On-Hold (MOH)
•
Call establish between 7100 & 8000 with 2-way audio
•
7100 & 8000 terminate normally
•
Call resume between 7100 & 7101
•
7101 notified of incoming call (tone /display)
•
7101 answers incoming call
•
7100 is On-Hold (MOH)
•
Call establish between 7101 & 1000 with 2-way audio
•
7101 & 1000 terminate normally
•
Call resume between 7100 & 7101
•
7100 & 7101 terminate normally
•
Call establish between 7100 & 1000 with 2-way audio
•
7100 notified of incoming call (tone /display)
•
7100 answers incoming call
•
1000 is On-Hold (MOH)
•
Call establish between 7100 & 2000 with 2-way audio
•
7100 & 2000 terminate normally
•
Call resume between 7100 & 1000
•
7100 & 1000 terminate normally
•
Call establish between 6200 & 7101 with 2-way audio
•
7101 notified of incoming call (tone /display)
•
7101 answers incoming call
•
6200 is On-Hold (MOH)
•
Call establish between 7101 & 5200 with 2-way audio
•
7101 & 5200 terminate normally
•
Call resume between 6200 & 7101
•
6200 & 7101 terminate normally
•
7 CDR(s) retrieved
•
Selected fields in CDR(s) match calls
RFC_Standard
P
F
N/A
N/S
N/T
x
Page 22 of 64
Y
B