Konftel 300IP Manual page 16

9.4 Features and Services
Test Case #
Objective
•
Local CUCMDUT(s):7100 & 7101;
•
Remote CUCM DUT:8000; SCCP:5200; SIP:6200;
•
RPC is used to remotely control IP Phones: 5200, 6200;
1. 7100 dials 23480008000 answers8000 on-hook after 30s
2. 7101 dials 2345200Select 5200 and answer call using RPC
3. Select "Headphone" icon
4. Enter "Play:AreYouThere.raw" and hit "Send" on the Command Line
5. 7101 speaks "Testing1234" 5200 on-hook after 60s
6. Repeat steps 2-5 with Calling DN:7101 & Called DN;6200
7. Calling & Called party release calls alternatively
8. Retrieve CDR from CUCM
9. Check Calling, Called, Duration, Origination & Termination
Cause Codes
Test Case #
Objective
•
Local CUCM  DUT(s):7100 & 7101;
•
Remote CUCM DUT:8000;
•
PSTN: 210-222-5400 (SIP);
•
RPC is used to remotely control PSTN Phone:2102225401;
1. 7100 dials 92102225400Select 2102225400 & answer using RPC
2. Select "Headphone" icon
3. Enter "Play:AreYouThere.raw" and hit "Send" on the Command Line
4. 7100 speaks "Testing1234" 2102225400 on-hook after 60s
5. Repeat steps1-4 with Calling DN:2102225400 & Called
DN:94104447101
6. Retrieve CDR from CUCM Server
7. Check Calling, Called, Duration, Origination & Termination
Cause Codes
Note: Inbound & Outbound PSTN calls are dialed with a prefix of "9"
© 2014 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public.
EP-3
Category
Functional Test: Inter-Cluster Call
Verify inter-cluster calls between DUT(s), SCCP and SIP endpoints
Test Procedure
Test Results: Comments
EP-4
Category
Functional Test: Off-Net Calls
Verify basic calls between DUT(s) and PSTN endpoints
Test Procedure
Test Results: Comments
Called to 6201 instead of 6200
Pre-Test Conditions
Expected Results
•
3 calls establish with 2-way audio path
•
Calling and Called Parties hear ring-back and ring tone
•
DUT receives Caller ID
•
Phone on RPC displays "monitoring active" message with
symbol
•
7100 & 8000 hear "Are you There"
•
5200 & 6200 hear "Testing 1234"
•
Audio for RPC phones heard on PC running Phoneview
•
3 calls terminate normally
•
3 CDR(s) retrieved
•
Selected fields in CDR(s) match calls
Pre-Test Conditions
Expected Results
•
2 Calls establish with 2-way audio path
•
Calling and Called Parties hear ring-back and ring tone
•
DUT receives Caller ID
•
Phone on RPC displays "monitoring active" message with
symbol
•
7100 & 7101 hear "Are you There"
•
2102225400 hears "Testing 1234"
•
Audio for RPC phones heard on PC running Phoneview
•
2 Calls terminate normally
•
2 CDR(s) retrieved
•
Selected fields in CDR(s) match calls
RFC_Standard
P F N/A N/S N/T
X
RFC_Standard
P F N/A N/S N/T
X
Page 16 of 64
Y
B
Y
B