Test Case #
Objective
Pre-Test Conditions
•
Local CUCMDUT(s):7100 & 7101; SCCP:1000; SIP:2000;
•
Remote CUCM DUT:8000;
•
PSTN: 2102225400;
•
Hotline Configuration to dial out 234-8000:
Call Routing Class of Control PartitionAdd Newpt_hotline_2348000
Call Routing Class of Control Calling Search SpaceAdd Newcss_hotline_2348000
Call RoutingTranslation PatternAdd New:
•
Assign 7100, 1000, 2000 a CSS for Intercluster Hotline: DevicePhoneDNCSScss_hotline_2348000
•
Assign 7101 a CSS for PSTN Hotline: Device Phone DN CSS css_hotline_2102225400 to DN:7101,
•
RPC is used to remotely control IP Phones with DN: 1000,2000, 2102225400;
Procedure
1. 7100 goes off-hook8000 rings & answers
2. 7100 goes on-hook after 30s
3. 1000 goes off-hook8000 rings & answers
4. 1000 goes on-hook after 30s
5. 2000 goes off-hook8000 rings & answers
6. 8000 goes on-hook after 30s
7. 7101 goes off-hook2102225400 rings & answers
8. 7101 goes on-hook after 30
9. Retrieve CDR from CUCM
10. Check the Calling, Called, Duration, Origination & Termination
Cause Codes
Note:
Upon completion of the test, change CSS for 7100, 7101, 1000 &
2000None
CUCM Administration:
DevicePhoneDNCSSNone
© 2014 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public.
EP-34
Category
Functional Test: Hotline
Verify "Hotline" calls between DUT(s), SCCP, SIP and PSTN endpoints
Translation Pattern blank
Partitionpt_hotline_2348000
CSScss_hotline_2348000
Called Party Transform Mask2348000
Test Results: Comments
Not supported on DUT
Expected Results
•
8000 ringing
•
Call establish between 7100 & 8000 with 2-way audio
•
Call terminate normally
•
8000 ringing
•
Call establish between 1000 & 8000 with 2-way audio
•
Call terminate normally
•
8000 ringing
•
Call establish between 2000 & 8000 with 2-way audio
•
Call terminate normally
•
2102225400 ringing
•
Call establish between 7101 & 2102225400 with 2-way audio
•
Call terminated normally
•
4 CDR()s retrieved
•
Selected fields in CDR match calls
P
RFC_Standard
N
F
N/A
N/S
N/T
B
x
Page 42 of 64