Konftel 300IP Manual page 40

Test Case #
Objective
Pre-Test Conditions
•
Local CUCMDUT(s):7100 & 7101 (Authenticated);
•
Remote CUCM DUT:8000 (Non-Secure);
•
PSTN: 2102225400;
•
Enterprise Parameter: Cluster Security Mode1 (Mixed Mode)
•
Assign authenticated Phone Security Profiles to devices:



•
RPC is used to remotely control IP Phones with DN: 1000,1001, 2000, 2001, 2102225400;
Test Procedure
1. 7100 dials 71017101 answers7100 on-hook after 30s
2. 7100 dials 234-80008000 answers8000 on-hook after 30s
3. 7100 dials 10011001 answers1001 on-hook after 30s
4. 2001 dials 71017101 answers7101 on-hook after 30s
5. 1000 dials 71007100 answers7100 on-hook after 30s
6. 7101 dials 20002000 answers2000 on-hook after 30s
7. 7100 dials 21022254002102225400 answers
8. 7100 goes on-hook after 30s
9. Retrieve CDR from CUCM
10. Check the Calling, Called, Duration, Secured Status,
Origination & termination Cause Codes
© 2014 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public.
EP-32
Category
Verify "Authenticated" call between DUT(s), SCCP, SIP and PSTN endpoints
SCCP:1000; SIP:2000 (Non-Secure);
SCCP:1001; SIP:2001 ( Authenticated);
7100 & 7101:DevicePhoneDNDevice Security Profile 3rd_Party_SIP_Advanced_Secure_Authenticated
1001: Device Security Profile==>7975_SCCP_Authenticated
2001: Device Security Profile8945_SIP_Authenticated
Test Results: Comments
Functional Test: Secure Endpoint
Expected Results
•
Authenticated call between 7100 & 7101 with 2-way audio
•
Call terminate normally
•
Non-Secure call between 7100 & 8000 with 2-way audio
•
Call terminate normally
•
Authenticated call between 7100 & 1001 with 2-way audio
•
Call terminate normally
•
Authenticated call between 2001 & 7101 with 2-way audio
•
Call terminate normally
•
Non-Secure call between 7100 & 1000 with 2-way audio
•
Call terminate normally
•
Non-Secure call between 2000 & 7101 with 2-way audio
•
Call terminate normally
•
Non-Secure call between 2102225400 & 7101
•
Call terminate normally
•
7 CDR(s) retrieved
•
Selected fields in CDR (s) match calls
Note: callSecuredstatus in CDR = 1
callSecuredstatus in CDR = 0 for unsecured calls
RFC_Standard
P F N/A N/S N/T
x
Page 40 of 64
N
B