Konftel 300IP Manual page 19

Test Case #
Objective
•
Local CUCMDUT(s):7100 & 7101; SCCP:1000; SIP:2000;
•
Remote CUCMDUT:8000; SCCP:5200 SIP:6200;
•
Voicemail and Call Waiting disabled for all DN(s) DevicePhoneDNLineVoicemailNoVoiceMail
•
Enable CFNA for DN(s):

DevicePhone7100CFNA1000 (SCCP)

DevicePhone7101CFNA2348000 (DUT)

DevicePhone8000CFNA6200 (SIP)

DevicePhone5200CFNA4447101 (DUT)

DevicePhone2000CFNA2348000 (DUT)
•
RPC is used to remotely control IP Phones: 1000, 2000, 5200, & 6200,
1. 7100 dials 71017101 does not answer8000 answers
2. 7100 goes on-hook after 30s
3. 8000 dials 44471007100 does not answer1000 answers
4. 1000 goes on-hook after 30s
5. 7101 dials 23480008000 does not answer6200 answers
6. 7101 goes on-hook after 30s
7.7101 dials 20002000 does not answer8000 does not answer
8. 6200 answers call
9. 8000 dials 52005200 does not answer7101 does not answer
10. 8000 goes on-hook - hears busy tone
11. 6200 goes on-hook
12. Retrieve CDR from CUCM
13. Check Calling, Called, Duration, Origination & Termination
Cause Codes
Note:
Upon test completion, remove "CFNA" feature for devices highlighted
in yellow before proceeding to next test case
CUCM Administration GUI:
DevicePhoneDNLineCFNADestinationblank
© 2014 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public.
EP-8
Category Functional Test: CFNA
Verify "CFNA" calls between DUT(s), SCCP and SIP endpoints
Test Procedure
Test Results: Comments
Pre-Test Conditions
Call WaitingMax. Calls1; Busy Trigger1;
Expected Results
•
Call forward to 8000 after ring timeout
•
Call establish between 7100 & 8000 with 2-way audio
•
Call terminate normally
•
Call forward to 1000 after ring timeout
•
Call establish between 8000 & 1000 with 2-way audio
•
Call terminate normally
•
Call forward to 6200 after ring timeout
•
Call establish between 7101 & 6200 with 2-way audio
•
Call terminate normally
•
Call forward to 6200 after ring timeout
•
Call establish between 7101& 6200 with 2-way audio
•
Call terminate normally
•
8000 hears busy tone and terminate call
•
Call on 6200 terminate normally
•
Call forward to 7100 after ring timeout
•
Call establish between 7101& 7100 with 2-way audio
•
Call terminate normally
•
Call forward to 8000 after ring timeout
•
5 CDR(s) retrieved
•
Selected fields in CDR(s) match calls
RFC_Standard
P F N/A N/S N/T
x
Page 19 of 64
Y
B