Konftel 300IP Manual page 35

Test Case #
Objective
•
Local CUCMDUT(s):7100 & 7101; SCCP:1000; SIP:2000;
•
Remote CUCM DUT:8000;
•
Jabber for Windows (DevicePhoneAdd NewCSFUSER1:DN:1922; End User:juser01/123456)
•
Windows PC with Jabber clients installed
1. 7100 dials 1922 (Duration=30s)
2. 1922 dials 7101 (Duration=30s)
3. 8000 dials 444-1922 (Duration=30s)
4. Calling and Called party goes on-hook alternatively
5. Retrieve CDR from CUCM
6. Check the Calling, Called, Duration, Origination & Termination
Cause Codes
Test Case #
Objective
•
Local CUCMDUT(s):7100 & 7101; SCCP:1000; SIP:2000; CIPC:1940;
•
Remote CUCM DUT:8000;
•
Launch IP Communicator on a PC: Phone PreferencesNetwork:


•
CIPC Credentials: ipcuser01/123456
•
Windows PC with IP Communicator client installed
1. 7100 dials 1940 (Duration=30s)
2. 1940 dials 7101 (Duration=30s)
3. 8000 dials 444-1940 (Duration=30s)
4. 1940 dials 234-8000 (Duration=30s)
5. Calling and Called party goes on-hook alternatively
6. Retrieve CDR from CUCM
7. Check the Calling, Called, Duration, Origination & Termination
Cause Codes
© 2014 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public.
EP-25
Category
Verify Jabber calls originating & terminating to DUT(s) endpoints (Jabber for Windows)
Test Procedure
Test Results: Comments
EP-26
Category
Verify IP Communicator calls originating & terminating to DUT(s) endpoints
Use this Device Name: CIPC00001940
Use this TFTP Servers:10.10.20.211
Test Procedure
Test Results: Comments
Functional Test: Jabber for Windows
Pre-Test Conditions
Expected Results
•
3 calls establish with 2-way audio
•
3 calls terminate normally
•
3 CDR(s) retrieved
•
Selected fields in CDR(s) match calls
Functional Test: IP Communicator
Pre-Test Conditions
Expected Results
•
4 calls establish with 2-way audio
•
4 calls terminate normally
•
4 CDR(s) retrieved
•
Selected fields in CDR(s) match calls
RFC_Standard
P F N/A N/S N/T
x
RFC_Standard
P F N/A N/S N/T
x
Page 35 of 64
Y
B
Y
B