Chain - BMW S 1000RR Rider's Manual

Installing fuse
Replace defective fuse with
fuse with required amperage.
NOTICE
An overview of the fuse assign-
ment and the required amper-
ages is provided in the chapter
"Technical Data". The numbers
in the graphic match the fuse
numbers.
Close fuse cover.
Locking device audibly en-
gages.
Install the passenger seat
( 62).

Chain

Lubricate chain
ATTENTION
Insufficient cleaning and lu-
brication of the drive chain.
Increased wear.
Clean and lubricate the drive
chain regularly.
Lubricate drive chain at lease
every 500 mls (800 km). After
driving though water or dust
and dirt perform the lubrication
at shorter intervals.
Switch off ignition and engage
Neutral.
Clean drive chain with suitable
cleaning agent, dry and apply
chain lubricant.
To extend and maximize
the chain's service life
BMW Motorrad recommends
using BMW Motorrad chain
lubricant or:
Lubricant
Chain spray
Wipe off excess lubricant.
Checking chain tension
Park motorcycle, ensuring that
support surface is firm and
level.
Turn the rear wheel until the
position with the lowest chain
sag is reached.
Using a screwdriver, push the
chain in the middle between
9
189
z