BMW S 1000RR Rider's Manual page 85

Consult the troubleshooting
chart if the engine refuses to
start. ( 200)
Pre-Ride-Check
After switching off the ignition,
the instrument cluster carries out
a test on the warning lights and
the engine speed display (the
Pre-Ride-Check). Starting the
engine before the test routine is
completed will cancel the remain-
der of the routine.
Phase 1
The indicator and warning lights
1 light up and the universal warn-
ing light 3 lights up in yellow.
The tachometer needle 2 is
run up to the maximum engine
speed.
All segments are shown in the
display.
Phase 2
The universal warning light
changes from yellow to red.
Phase 3
The tachometer needle drops
back to zero.
The indicator and warning lights
go out.
The display reverts to the stan-
dard format. The odometer is
displayed.
Should one of the warning lights
fail to appear:
WARNING
Defective warning lights.
Lack of display of malfunctions.
Watch all warning and indicator
lights on the display.
Have the malfunction corrected
as soon as possible at an
authorized service facility,
preferably an authorized
BMW Motorrad Retailer.
ABS self-diagnosis
The readiness for operation of
the BMW Motorrad Race ABS
is checked by the self-diagnosis.
The self-diagnosis routine runs
automatically when you switch on
6
83
z